Z&L Factory Supply Hydraulic Oil Filter 311275 01. E 631.10vg. 16. S. P. 311546 01. E 631.16vg. 16. E. P. 311828 01. E 631.16vg. 16. S. P.

• Customization: Available
• Structure: Fixed
• Usage: Oil Impurities, Air Filter
• Model NO.: 311275 01. E 631.10VG. 16. S. P.
• Mechanical Principle: Ordinary
• Performance: Efficient Filtration
• Transport Package: as Client′s Requirments
• Trademark: Z&L
• Origin: Hebei. China
• Production Capacity: 1000000000 Piece/Pieces Per Week

Product Description

Z&L factory supply hydraulic Oil filter 311275 01.E 631.10VG.16.S.P. 311546 01.E 631.16VG.16.E.P. 311828 01.E 631.16VG.16.S.P.
Product details
Element series:01NR series
Efficiency:99.99%
Construction:Cartridge Filter
Place of Origin:HEBEI. CHINA
Brand Name:Z&L FILTER
HEIGHT: 15 IN
OD:3.5 IN
Weight: 5KG:
Type: engine &vehicle air filter for engine ,generator,transmission ,pump truck ,dump truck
Material: glass fiber
Certification:ISO2009:2015
Filtration micron: 10  micron
Filtration efficiency : 98%
Working pressure (PSI) : 305
Low operating temperature (F) : -13
High operating temperature (F) : 248
Flow: from outside to inside
Material of gasket: nitrile rubber
Fluid type: HH/ HL/ HM/ HV/ HFD
Accuracy: 10 microns
Product Description

Filter media -	fully synthetic composite.
End caps -	Electrostatic-Coating, Seepage zinc plate, Galvanized (ASTM A653, 60G TST, both sides) or stainless steel.
In / Out Liner -	Electrostatic-Coating, Seepage zinc plate, Galvanized (ASTM A653, 60G TST, both sides) or stainless steel.
Potting -	Media shall be permanently and completely bonded to the end caps with Polyurethane or Plastisol or epoxy sealant.
Gasket -	Seamless EPDM rubber (ethylene propylene diene monomer rubber - ASTM D1418) or molded in place urethane or polyisoprene sponge rubber.
Pleats are to	be stabilized by hot-melt adhesive on both inner and outer cores.
Filters are to have	polyester coalescing wrap (per-filter) pre-installed by the manufacturer.

Product performance 

Efficiency -	F9. Minimum 99.9% (HEPA).
Hydrophobic	(water proof),  moisture proof,  Antiflaming.
Salt Repellent -	must remove 99.5% of all salt crystals from turbine inlet air.
Wet Burst Pressure -	greater than 7500 Pa (30" wc).
Initial Pressure Drop -	180 Pa @ 2500 m3/h (.72" wc @ 1472 cfm).
Temperature Range -	-40°C to +65°C (-40°F to +149°F).
Humidity Range -	0 to 100% relative humidity.
Flame Retardance -	E d 2 according to EN 13501.
fit	air inlet systems without modification.

Z&L factory supply hydraulic Oil filter 311275 01.E 631.10VG.16.S.P. 311546 01.E 631.16VG.16.E.P. 311828 01.E 631.16VG.16.S.P.
Packaging & Shipping

Most reasonable and competitive price
Courier service	UPS , DHL ,TNT and EMS for light weight items
Delivery Time	Stocked items, within 5 days
Payment Method	T/T, Western Union, L/C, Paypal
Package
Type 1	Carton Box + Pallet
Type 2	Plastic Bag + Carton Box + Pallet
Type 3	Plastic Bag(Design) + Carton Box(Design) + Pallet
Type 4	Plastic Bag(Design) + Carton Box(Design) + Wooden Case

Detailed Image


Related Series No.

01.NR 630.3VG.10.B.P	01.NR 1000.25API.10.B.V,	01.NR 1000.25V.10.B.P, 25V
01.NR 630.6VG.10.B.P.	01.NR 1000.10API.10.B.V,	01.NR 1000.250G.10.B.V.
01.NR 630.10VG.10.B.P.	01.NR 1000.3VG.10.B.P.VA,	01.NR 630.1VG.10.B.V.
01.NR 630.25G.10.B.P	01.NR 1000.25VG.16.B.V.IS25,	01.NR 1000.25G.10.B.P.I
01.NR 630.25VG.10.B.P	01.NR 630.25VG.10.B.V,	01.NR 1000.10.1G.10.B.V.
01.NR 1000.6VG.10.B.P.	01.NR 1000.25.1G.10.B.P.	01.NR 1000.500G.10.B.P
01.NR 630.40G.10.B.P	01.NR 1000.1000G.10.B.P,	01.NR 1000.3VG.10.B.P.IS06,
01.NR 630.80G.10.B.P	01.NR 250.25G.10.B.P,	01.NR 630.25G.10.B.P.VA,
01.NR 1000.3VG.10.B.P.	01.NR 1000.25VG.10.B.N	01.NR 1000.25VG.10.B.P.V,
01.NR 1000.10VG.10.B.P.	01.NR 250.3VG.10.B.V.V	01.NR 1000.3VG.10.B.V.VA,
01.NR 1000.25VG.10.B.P	01.NR 1000.32227.10VG.25G.25.B.V.	01.NR 1000.25V.10.B.P.IS27
01.NR 1000.16VG.10.B.P	01.NR 1000.32227.10VG.25G.25.B .P.	01.NR 1000.10.1G.10.B.V.VA
01.NR 1000.25G.10.B.P.	01.NR 1000.1VG.10.B.P.IS	01.NR 1000.10API.10.B.P.VA
01.NR 1000.40G.10.B.P.	01.NR 250.25VG.10.B.V.,	01.NR 1000.10API.10.B.P.
01.NR 1000.80G.10.B.P.	01.NR 1000.25V.10.B.P, 25V	01.NR 1000.25API.10.B.P
01.NR 1000.130G.10.B.P,	01.NR 1000.250G.10.B.V.,	01.NR 1000.25API.10.B.P.VA
01.NR 630.16VG.10.B.P,	01.NR 630.1VG.10.B.V.-	01.NR 1000.25VG.10.B.V.I,
01.NR 1000.25VG.10.B.P.IS06	01.NR 1000.25G.10.B.P.I	01.NR 1000.10VG.10.B.V.,
01.NR 1000.25G.10.B.V	01.NR 1000.10.1G.10.B.V	01.NR 1001.10API.10.B.P.
01.NR 1000.40G.10.B.V.	01.NR 1000.500G.10.B.P	01.E 150.25G.30.E.P,
01.NR 1000.10P.10.B.P,	01.NR 1000.3VG.10.B.P.IS06	01.E 600.80G.HR.E.P.VA
01.NR 1000.3VG.10.B.V.	01.NR 630.25G.10.B.P.VA	01.E 900.10VG.HR.E.P.VA,
01.NR 1000.10VG.10.B.V.-	01.NR 1000.25VG.10.B.P.V,	01.E 900.16VG.HR.E.P.
01.NR 1000.80G.10.B.P.VA	01.NR 1000.3VG.10.B.V.VA	01.E 450.10VG.HR.E.V.VA
01.NR 1000.16VG.10.B.V.	01.NR 1000.25V.10.B.P.IS27	01.E 170.40G.HR.E.P
01.NR 1000.25VG.10.B.V	01.NR 1000.10.1G.10.B.V.VA	01.E 450.10VG.HR.E.P.VA
01.NR 630.3VG.10.B.V.-	01.NR 1000.10API.10.B.P.VA,	01.E 600.25G.HR.E.P,
01.NR 1000.25G.10.B.P.V	1000.10API.10.B.P.	01.E 90.25VG.HR.E.V.
01.NR 100.25VG.10.B.P.	01.NR 1000.25API.10.B.P.	01.E 90.3VG.30.E.P,
01.NR 1000.80G.10.B.V.	01.NR 1000.25API.10.B.P.VA,	01.E 90.3VG.30.E.P,
01.NR 630.10VG.10.B.V	01.NR 1000.25VG.10.B.V.I,	01.E 90.25G.30.E.P,
01.NR 63.25VG.10.B.P	01.NR 1000.10VG.10.B.V.,	01.E 240.80G.HR.E.P.VA,
01.NR 1000.10VG.10.B.P.VA	01.NR 1001.10API.10.B.P.,	01.E 900.25G.HR.E.P.VA
01.NR 100.10VG.10.B.P	01.NR 1000.25API.10.B.V,	01.E 900.25G.HR.E.P.VA
01.NR 1000.500G.10.B.P	01.NR 1000.10API.10.B.V, 10API	01.E 360.6VG.HR.E.P.VA
01.NR 1000.40G.10.B.P.V	01.NR 1000.3VG.10.B.P.VA,	01.E 900.3VG.HR.E.V
01.NR 250.10VG.10.B.P.-	01.NR 1000.25VG.16.B.V.IS25	01.E 150.25VG.HR.E.P.VA
01.NR 63.10VG.10.B.P,	01.E 450.25G.HR.E.P	01.E 60.500G.HR.E.P.
01.NR 160.10VG.10.B.P	01.E 600.3VG.HR.E.P	01.E 170.6VG.30.E.P,
01.NR 250.25VG.10.B.P	01.E 600.10VG.HR.E.V,	01.E 240.6VG.30.E.P
01.NR 250.3VG.10.B.P.	01.E 600.6VG.HR.E.P.	01.E 240.16VG.HR.E.P.
01.NR 250.6VG.10.B.P,	01.E 900.3VG.HR.E.P	01.E 360.16VG.HR.E.P
01.NR 1000.250G.10.B.P.	01.E 900.10VG.30.E.P.	01.E 450.6VG.30.E.P
01.NR 1000.6VG.10.B.P.IS	01.E 900.25VG.30.E.P,	01.E 600.6VG.30.E.P
01.NR 400.10VG.10.B.P	01.E 60.25G.30.E.P	01.E 60.16VG.HR.E.P,
01.NR 1000.10VG.10.B.P.I	01.E 90.3VG.HR.E.V	01.E 60.25G.30.E.P.VA
01.NR 1000.1VG.10.B.V,	01.E 60.80G.30.E.P	01.E 90.130G.30.E.P.
01.NR 1000.250G.10.B.V	01.E 600.10VG.30.E.V	01.E 90.25G.30.E.P.VA,
01.NR 630.1VG.10.B.P.-	01.E 450.3VG.HR.E.P	01.E 90.6VG.30.E.P
01.NR 1000.25VG.16.B.V.IS25 FA,	01.E 60.6VG.30.E.P	01.E 150.6VG.30.E.P
01.NR 250.1VG.10.B.P.	01.E 240.25G.30.E.P.	01.NR 250.25G.10.B.P,
01.NR 630.250G.10.B.P.	01.E.240.40G.30.E.P.	01.NR 1000.25VG.10.B.N
01.NR 630.6VG.10.B.V	01.E 30.3VG.30.E.P,	01.NR 250.3VG.10.B.V.V,
01.NR 1000.500G.10.B.V	01.E 30.6VG.30.E.P,	01.NR 1000.32227.10VG.25G.25.B.V.
01.NR 1000.10G.10.B.P.	01.E 30.6VG.30.E.P,	01.NR 1000.1000G.10.B.P
01.NR 250.3VG.10.B.V,	01.E 30.3VG.HR.E.P,	01.NR 1000.1VG.10.B.P.IS
01.NR 630.6VG.10.B.P.V	01.E 170.40G.30.E.P.-,	01.NR 250.25VG.10.B.V
01.NR 1000.1VG.10.B.P.	01.E 170.25G.30.E.P,	01.NR 400.25VG.10.B.P
01.NR 400.3VG.10.B.P	01.NR 1000.25.1G.10.B.P	01.NR 630.25VG.10.B.V

Our Service
Service Provide: 
OEM ODM & OBM service, printing or logo information is acceptable.
 
Quality Guarantee:
All products have to pass strict inspection before they go out. If any problems caused by the
product itself, we will supply you the new replaced ones ASAP.
 
After-sales Service:
Any problems caused by using our products:
 
1) Keep the problem products and timely contact with us for better feedbacks.
 
2) Please do not damage problem products, if necessary, Send the 
    products and the attached oil and the coolant sample together to us for better analyzing
 
3) Attached with repair document, parts list, labor costs and any other materials which 
    can support a claim for compensation. 

Why Choose Us?
Image for onsite workshop




Our clinets 

if more details ,please search z&l filter on google !